Working on the new Drone Volt Hercules 20. A drone with eight 26 inches propellers and four 6S 16Ah batteries that can carry a 20kg payload.
In order to be able to shut down properly the Aerialtronics Pensar camera on a DJI M600, we created a small PWM generator. The shut down signal can be sent to the camera using a switch on the top of … Read More
Here is another customized Hercules 10 from Drone Volt featuring two remote controls, two FPV cameras and a remote controlled hook to release payload during flight. The drone can be controlled by one remote control at a time allowing long … Read More
Here are two DJI Matrice 600 mounted with droneDyne’s customized Gremsy T3 to power Aerialtronics Pensar camera without any wire between the drone and the gimbal. The co pilot can select the vision camera or IR camera, record videos, take … Read More
Mounting an Aerialtronics Pensar camera on a Drone Volt Hercules with a Gremsy T3-A gimbal. The challenge was to power the Pensar with 24V while keeping the three PWM signals without adding any wires between the drone and the gimbal. … Read More
Mounting a FLIR Duo Pro R on a Gremsy T3 gimbal on an Altura Zenith. The gimbal is controlled by the second remote control as well as the FLIR zoom, taking pictures, video and change view mode (thermal, picture in … Read More
Have you ever wondered how to take control of a drone when it arrives at its destination after an automatic mission? Here is a picture of droneDyne’s solution to control a DroneVolt Hercules 10 with two remote controls. One is … Read More
Watch the steam train festival from another angle! Taken in Brussels during a sunny week-end of October. My first official video taken with a DJI Mavic air.